Cisco Cisco TelePresence Management Suite (TMS) Version 15 Maintenance Manual
Event type
Description
Low Battery on Remote
Control
Control
Low battery on system's remote control. (Polycom VSX only.)
Other
Other events not explicitly supported by Cisco TMS
Pre-registered System
Activated
Activated
A pre-registered system has been detected and activated.
Scheduling
The system is scheduled by Cisco TMS, or a scheduled conference is changed or
deleted.
deleted.
Scheduling error
An error has occurred in a scheduled conference.
System type Changed
Cisco TMS has registered a change in system type for a system.
Upgrade
System software upgraded.
User Assistance Requested
The user has requested assistance.
Table 96 Event types for which notifications can be configured (continued)
System Status Reporting
Status
Description
Idle
Cisco TMS can communicate with this system, and the system has no active calls registered.
In Call
The system is in a scheduled or ad hoc call.
Unknown
Cisco TMS cannot determine the status of this system. Systems that are recently pre-registered or
systems behind a firewall may be found in this state.
systems behind a firewall may be found in this state.
Not Yet
Activated
Activated
Pre-registered systems waiting to be added to a Cisco TMS are found in this state.
Network
address
missing
address
missing
No IP address is set on the system. Cisco TMS will therefore not be able to track the system on IP
address.
address.
Alive
Cisco TMS can communicate with the system, but is unabled to determine whether there are active
calls on the system.
calls on the system.
No SNMP
response
response
Cisco TMS is failing to communicate with this system using SNMP. This communication may fail if
SNMP Community Name is set incorrectly in the system's Connection tab in Systems > Navigator. No
SNMP response is a detailed status of the No Response status.
No HTTP
response
response
A system that Cisco TMS cannot communicate with using HTTP or HTTPS. No HTTP response is a
detailed status of the No Response status.
detailed status of the No Response status.
No Telnet
response
response
Cisco TMS is failing to communicate with this system using the telnet protocol. No telnet response is a
detailed status of the No Response status.
detailed status of the No Response status.
Wrong
username
or
password
username
or
password
Cisco TMS is using the wrong credentials and cannot communicate with this system. Use the
Connection tab of the system to correct the username and/or password used to communicate with the
system. Wrong username or password is a detailed status of the No Responsestatus.
system. Wrong username or password is a detailed status of the No Responsestatus.
Table 97 System statuses can be seen in for example Systems > Navigator
153
Cisco TelePresence Management Suite Administrator Guide
Adding and Managing Systems