Cisco Cisco TelePresence Management Suite (TMS) Version 15 Maintenance Manual
Section/field
Description
Internal Calls
Number of digits to use
for internal ISDN calls
for internal ISDN calls
Number of digits used for internal dialing between systems in the zone. The first digits in
the number will be stripped from the number when dialing between systems in this ISDN
zone.
the number will be stripped from the number when dialing between systems in this ISDN
zone.
Table 170 ISDN Zone settings (continued)
Area Code Rules
When viewing or editing an ISDN zone, clicking Area Code Rules brings up a page where you can add and edit area
code rules for the United States.
code rules for the United States.
When creating or editing an area code rule, the following fields are available:
Field
Description
When dialing from this area
code to the following area
code
code to the following area
code
Specify the area code this rule should apply for. For example, if you want the rule
to apply every time dialing 555, specify
to apply every time dialing 555, specify
555
in this field.
With the following prefixes
The prefix is the first three digits of the base number. Leave blank if you want the
rule to apply for all calls made to the area code in the above field.
rule to apply for all calls made to the area code in the above field.
Include Area Code
Check this if you want the rule to include the area code specified above in the
call. For the US, check to enable 10-digit dialing.
call. For the US, check to enable 10-digit dialing.
Before dialing, also dial
Enter a string here to include in front of the dial string created by this area code
rule (before the area code and prefixes specified in the first two fields above).
rule (before the area code and prefixes specified in the first two fields above).
Strip digits for zone's local
outside line access
outside line access
Check to strip the outside line prefix (set in Administrative Tools > Locations >
ISDN Zones > Line section) from the number you are going to dial.
Table 171 Settings for area code rules
IP Zones
In Cisco TMS: Administrative Tools > Locations > IP Zones
On this page, a list of any existing IP zones is presented, and new zones can be created:
■
Hover over each zone on the list to access the drop-down menu with options to View, Edit, or Set on
Systems.
Systems.
■
Click New to start creating a new IP zone.
When creating or editing an IP zone, the below settings are available. With these settings you specify which prefixes
to dial in order to use a gateway. Specifying the prefix rather than the gateway directly creates the flexibility to use
load-balanced gateways, and even gateways not supported by Cisco TMS.
to dial in order to use a gateway. Specifying the prefix rather than the gateway directly creates the flexibility to use
load-balanced gateways, and even gateways not supported by Cisco TMS.
Sections and fields
Description
IP Zone
Name
Set a name for the IP zone.
Table 172 IP Zone settings
265
Cisco TelePresence Management Suite Administrator Guide
Administrative Tools