Cisco Cisco TelePresence Management Suite (TMS) Version 15 Maintenance Manual
Sections and fields
Description
IP Zone
Name
Set a name for the IP zone.
Gateway Resource
Pool
Pool
ISDN Zone
Specify which ISDN zone you want the below gateway prefixes to use. Note that the Gateway
Resource Pool will not work correctly unless this setting has been specified.
Resource Pool will not work correctly unless this setting has been specified.
URI Domain Name
Cisco TMS will always use URI dialing between two locations where this setting is filled in,
thereby ignoring the IP/ISDN preferences defined at the bottom of this page.
thereby ignoring the IP/ISDN preferences defined at the bottom of this page.
Gateway Auto Prefix
The prefix needed to dial a video ISDN number from this IP zone using a Gateway.
Gateway Telephone
Prefix
Prefix
The prefix needed to dial an audio ISDN number from this IP zone using a Gateway.
Gateway 3G Prefix
The prefix needed to dial a 3G mobile phone number from this IP zone using a Gateway.
Dial-in ISDN Number
These numbers are used for generating TCS-4 numbers like +15551231234*99999 when
Cisco TMS is routing a call:
Cisco TMS is routing a call:
■
from PSTN and into an IP zone.
■
from a 3G network and into an IP zone.
After the settings are saved, these numbers will both be shown as qualified numbers.
Dial-in ISDN Number
for 3G
for 3G
Allow IP-ISDN-IP
.
Prefer ISDN over IP
calls to these IP Zones
calls to these IP Zones
Lists of IP zones to which:
■
ISDN is preferred over IP.
■
IP is preferred over ISDN.
The lists are used when scheduling calls between IP zones. Move zones between lists by
selecting them and clicking the arrow buttons.
selecting them and clicking the arrow buttons.
Prefer IP calls over
ISDN to these IP
zones
ISDN to these IP
zones
Table 165 IP Zone settings
Billing Codes
In Cisco TMS:
Administrative Tools > Billing Codes
Create and manage billing codes, and set them on systems, in these pages.
Manage Billing Codes
In Cisco TMS:
Administrative Tools > Billing Codes > Manage Billing Codes
Billing codes are only supported for Cisco TelePresence MXP systems.
On this page you can create, edit and delete billing codes, and set them on systems.
Using billing codes, you can:
249
Cisco TelePresence Management Suite Administrator Guide
Administrative Tools