Cisco Cisco TelePresence Management Suite (TMS) Version 15 Maintenance Manual
(...)
<PostEvent>
<Identification>
<SystemName>example_system</SystemName>
<MACAddress>A1:B2:C3:D4:E5:06</MACAddress>
<IPAddress>172.16.0.20</IPAddress>
<ProductType>TANDBERG Codec</ProductType>
<ProductID>TANDBERG Codec</ProductID>
<SWVersion>TC4.1.2.257695</SWVersion>
<HWBoard>101400-5 [08]</HWBoard>
<SerialNumber>B1AC00A00000</SerialNumber>
</Identification>
<Event>Register</Event>
</PostEvent>
(...)
In the example above, the Cisco TelePresence Codec C90 reports its local IP address as 172.16.0.20.
n
A system is set to Reachable on LAN, and reports its IP address as: 172.16.0.20. The Source IP Address
in the IP header is also: 172.16.0.20. Cisco TMS keeps the system as Reachable on LAN.
in the IP header is also: 172.16.0.20. Cisco TMS keeps the system as Reachable on LAN.
n
A system is set to Reachable on LAN, and reports its IP address as: 172.16.0.20. The Source IP Address
in the IP header is: 10.0.0.50. Cisco TMS then attempts to contact the system on 10.0.0.50. When the
request times out, Cisco TMS changes the system to Behind Firewall.
in the IP header is: 10.0.0.50. Cisco TMS then attempts to contact the system on 10.0.0.50. When the
request times out, Cisco TMS changes the system to Behind Firewall.
n
A system is set to Reachable on Public Internet, and reports its IP address as: 172.16.0.20. The Source IP
Address in the IP header is: 10.0.0.50. Cisco TMS then attempts to contact the system on 10.0.0.50, and
the network device at 10.0.0.50 is able to route the traffic back to the original system. The original system
replies to Cisco TMS, and Cisco TMS keeps the system as Reachable on Public Internet.
Address in the IP header is: 10.0.0.50. Cisco TMS then attempts to contact the system on 10.0.0.50, and
the network device at 10.0.0.50 is able to route the traffic back to the original system. The original system
replies to Cisco TMS, and Cisco TMS keeps the system as Reachable on Public Internet.
Calendar push behavior
Cisco TMS sends lists of future bookings to endpoints that support the Meetings calendar feature. The
bookings include subject, organizer, connection type, start time and so on.
bookings include subject, organizer, connection type, start time and so on.
The calendar pusher mechanism:
n
updates all systems, waits for a minute, then starts again.
n
pushes entries that are at most 72 hours in the future.
n
pushes to all systems that have seen a calendar change since the last time it ran.
Endpoints present this Meetings calendar information in different ways depending on the model and software
version.
version.
Cisco TelePresence Management Suite Administrator Guide (14.5)
Page 63 of 340
System management overview
How Cisco TMS communicates with managed systems