Cisco Cisco TelePresence Management Suite (TMS) Version 15 Maintenance Manual
1. Go to
Systems > Navigator
and locate or create the folder to which you want the systems added.
2. Click Add Systems.
3. Go to the
Pre-register Systems
tab.
4. Select the primary identifier to use for the systems; a MAC address, IP address, or serial number for
legacy systems.
5. For each system, add the primary identifier.
You may also choose to add a System Name, H.323 ID, E.164 Alias, SIP URI, and a Password if
required.
required.
6. Add location settings for the systems; IP/ISDN zone, and time zone.
7. Select whether to make any of the pre-registered settings persistent, whether to add a configuration
template on first boot, and whether to set a persistent template.
8. Click Add System(s).
An entry for the system containing minimal information is added to the parent folder with System Status
set to Not Yet Activated.
set to Not Yet Activated.
When the system comes online and registers, the status and system information are updated automatically.
You can receive notification when this occurs by setting up an event notification for Preregistered System
Activated in
You can receive notification when this occurs by setting up an event notification for Preregistered System
Activated in
Systems > Event Notification Manager
.
Pre-registration of infrastructure systems is not supported.
For similar functionality with more flexibility and scalability, we recommend large-scale provisioning using
Cisco TelePresence Management Suite Provisioning Extension (Cisco TMSPE), see
Cisco TelePresence Management Suite Provisioning Extension (Cisco TMSPE), see
Adding endpoints behind a firewall/NAT
Prerequisite
Before you can use a system behind a firewall/NAT in Cisco TMS, you must set a public DNS address on
the Cisco TMS server:
the Cisco TMS server:
1. Go to
Administrative Tools > Configuration > Network Settings
.
2. Under
Advanced Network Settings for Systems on Public Internet/Behind Firewall
, set
TMS Server Address to be a public DNS address.
3. Click Save.
Adding to Cisco TMS while on the network
The easiest way to add a system that will be located behind a firewall/NAT to Cisco TMS is to first connect
the system to the organization's network so that you can add it following the steps in
the system to the organization's network so that you can add it following the steps in
.
When the system has been added:
1. Go to
Systems > Navigator
, locate the system and open the
Settings
tab.
2. Set System Connectivity to Behind Firewall.
3. Click Enforce Management Settings.
Cisco TMS will now set the management address on that system to Cisco TMS' external management
address.
address.
Cisco TelePresence Management Suite Administrator Guide (14.5)
Page 70 of 340
Adding and managing systems
Adding systems