Cisco Cisco TelePresence Management Suite (TMS) Version 15 Maintenance Manual
Field
Description
When dialing from this area
code to the following area
code
code to the following area
code
Specify the area code this rule should apply for. For example, if you want the
rule to apply every time dialing 555, specify 555 in this field.
rule to apply every time dialing 555, specify 555 in this field.
With the following prefixes
The prefix is the first three digits of the base number. Leave blank if you want the
rule to apply for all calls made to the area code in the above field.
rule to apply for all calls made to the area code in the above field.
Include Area Code
Check this if you want the rule to include the area code specified above in the
call. For the US, check to enable 10-digit dialing.
call. For the US, check to enable 10-digit dialing.
Before dialing, also dial
Enter a string here to include in front of the dial string created by this area code
rule (before the area code and prefixes specified in the first two fields above).
rule (before the area code and prefixes specified in the first two fields above).
Strip digits for zone's local
outside line access
outside line access
Check to strip the outside line prefix (set in
Administrative Tools > Locations >
ISDN Zones >
Line section) from the number you are going to dial.
IP Zones
In Cisco TMS:
Administrative Tools > Locations > IP Zones
On this page, a list of any existing IP zones is presented, and new zones can be created:
n
Hover over each zone on the list to access the drop-down menu with options to View, Edit, or Set on
Systems.
Systems.
n
Click New to start creating a new IP zone.
When creating or editing an IP zone, the below settings are available. With these settings you specify which
prefixes to dial in order to use a gateway. Specifying the prefix rather than the gateway directly creates the
flexibility to use load-balanced gateways, and even gateways not supported by Cisco TMS.
prefixes to dial in order to use a gateway. Specifying the prefix rather than the gateway directly creates the
flexibility to use load-balanced gateways, and even gateways not supported by Cisco TMS.
Sections and fields
Description
IP Zone
Name
Set a name for the IP zone.
Gateway Resource
Pool
Pool
ISDN Zone
Specify which ISDN zone you want the below gateway prefixes to use. Note that the
Gateway Resource Pool will not work correctly unless this setting has been specified.
Gateway Resource Pool will not work correctly unless this setting has been specified.
URI Domain Name
Cisco TMS will always use URI dialing between two locations where this setting is filled
in, thereby ignoring the IP/ISDN preferences defined at the bottom of this page.
in, thereby ignoring the IP/ISDN preferences defined at the bottom of this page.
Gateway Auto Prefix
The prefix needed to dial a video ISDN number from this IP zone using a Gateway.
Gateway Telephone
Prefix
Prefix
The prefix needed to dial an audio ISDN number from this IP zone using a Gateway.
Gateway 3G Prefix
The prefix needed to dial a 3G mobile phone number from this IP zone using a Gateway.
Cisco TMS Administrator Guide (14.1)
Page 259 of 320
Administrative Tools
Locations