Cisco Cisco MeetingTime Quick Setup Guide

 in the 

 module 

 module 

Auto-answer devices are audio or video endpoints that are incapable of entering the dual-tone 
multi-frequency (DTMF) signals that are required to use the telephone user interface (TUI). Many 
auto-answer devices automatically answer calls even when people are not present or using the device.

To specify a user profile as an auto-answer device, enter the following exact text in the 

 user 

profile field: autoanswerdevice 

 in the 

 module 

To prevent auto-answer devices from wasting system resources, Cisco Unified MeetingPlace 
automatically disconnects auto-answer devices from meetings. Perform one of the following procedures 
to modify when auto-answer devices are disconnected from meetings.

Log in to the Administration Center.

Select System Configuration > Meeting Configuration.

Configure the following fields:

—If your Cisco Unified MeetingPlace system is integrated with 

Cisco WebEx, then set this field to Yes. Otherwise, the Cisco WebEx audio recorder will not work.

—Set this field to Yes if the previous two 

fields are also set to Yes. Otherwise, the system will never automatically disconnect auto-answer 
devices from continuous meetings.