Cisco Cisco MeetingTime Quick Setup Guide

Perform this task if you have already deployed Cisco Unified Communications Manager 5.x and are 
using Cisco Unified Communications Manager 6.1 or a later release to provide front-end signaling for 
Cisco Unified MeetingPlace.

You may instead choose to configure inter-cluster trunks (instead of SIP trunks) between 
Cisco Unified Communications Manager 5.x and Cisco Unified Communications Manager 6.1 or a 
later release. If this is the case, then do not perform this task. Instead, see the 

Complete the 

.

Perform this task on both of the following servers:

Cisco Unified Communications Manager 5.x

Cisco Unified Communications Manager 6.1 or a later release

We recommend that you configure a Calling Search Space in Cisco Unified 
Communications Manager that does the following:

Allows dial-out calls to meeting participants and the help desk 

Prevents toll fraud by blocking unwanted dial-out calls, for example, to international or 
premium-rate telephone numbers.

See the Administration Guide for your release of Cisco Unified Communications Manager at 

You perform this task in the Cisco Unified Communications Manager Administration pages. 
Because the pages and menus vary by release, you should check the Cisco Unified 
Communications Manager Administration online help for step-by-step instructions that are specific 
to your release.

Go to http://ccm-server/ccmadmin/main.asp, where ccm-server is the fully-qualified domain name or 
IP address of the Cisco Unified Communications Manager server.

Log in with your Cisco Unified Communications Manager administrator username and password.

Select Device > Trunk.

Select Add New.

In the Trunk Type field, select SIP Trunk.

Select Next.

Configure the fields described in