Cisco Cisco MeetingTime Quick Setup Guide

Repeat this task so that both of the following servers are configured with SIP trunks that point to each 
other:

Cisco Unified Communications Manager 5.x

Cisco Unified Communications Manager 6.1 or a later release

 in the 

 module 

Proceed to the 

Perform this task if you already deployed Cisco Unified Communications Manager 4.x or 5.x and are 
using Cisco Unified Communications Manager 6.1 or a later release to provide front-end signaling for 
Cisco Unified MeetingPlace.

You may instead choose to configure SIP trunks (instead of inter-cluster trunks) between 
Cisco Unified Communications Manager 5.x and Cisco Unified MeetingPlace 6.1 or a later release. 
If this is the case, then do not perform this task. Instead, see the 

.

Complete the 

.

Perform this task on both of the following servers:

Cisco Unified Communications Manager 4.x or 5.x

Cisco Unified Communications Manager 6.1 or a later release

We recommend that you configure a Calling Search Space in Cisco Unified 
Communications Manager that does the following:

Allows dial-out calls to meeting participants and the help desk 

Prevents toll fraud by blocking unwanted dial-out calls, for example, to international or 
premium-rate telephone numbers.

See the Administration Guide for your release of Cisco Unified Communications Manager at 

You perform this task in the Cisco Unified Communications Manager Administration pages. 
Because the pages and menus vary by release, you should check the Cisco Unified 
Communications Manager Administration online help for step-by-step instructions that are specific 
to your release.