Cisco Cisco MeetingTime Quick Setup Guide
Configuring Cisco Unified MeetingPlace Directory Service
How to Configure Cisco Unified Communications Manager for Directory Service
10
Enabling LDAP Synchronization on Cisco Unified Communications Manager
Before You Begin
Read the
.
Procedure
Step 1
Go to http://<ccm-server>/ccmadmin/, where <ccm-server> is the fully-qualified domain name or
IP address of the Cisco Unified Communications Manager server.
IP address of the Cisco Unified Communications Manager server.
Step 2
Log in with your Cisco Unified Communications Manager administrator username and password.
Step 3
Select System > LDAP > LDAP System.
Step 4
Check Enable Synchronizing from LDAP Server.
Step 5
Choose the appropriate server type and user ID attribute.
You can select Help > This Page at any time to find detailed information.
Step 6
Select Save.
What to Do Next
Proceed to the
.
Adding an LDAP Directory to Cisco Unified Communications Manager
Before You Begin
Complete the
.
Procedure
Step 1
Log in to Cisco Unified Communications Manager Administration:
a.
Go to http://<ccm-server>/ccmadmin/, where <ccm-server> is the fully-qualified domain name or
IP address of the Cisco Unified Communications Manager server.
IP address of the Cisco Unified Communications Manager server.
b.
Log in with your Cisco Unified Communications Manager administrator username and password.
Step 2
Select System > LDAP > LDAP Directory.
Step 3
Select Add New.
Step 4
Configure the fields on the LDAP Directory page.
You can select Help > This Page at any time to find detailed information.
Step 5
Select Save.