Cisco Cisco Unified MeetingPlace Audio Server Quick Setup Guide

Page of 766
 
Configuring Meetings for Cisco Unified MeetingPlace
Displaying Meeting Times Using a 12- or 24-Hour Clock
5
 
Step 4
Set the 
 field to System administrator.
This user will now see the continuous meeting option while scheduling recurring meetings.
Step 5
Select Save.
Step 6
Repeat 
Step 2
 through 
Step 5
 for all user profiles for which you want to enable the scheduling of 
continuous meetings.
Related Topics
  •
 in the 
 module 
Displaying Meeting Times Using a 12- or 24-Hour Clock
Procedure
Step 1
Log in to the Administration Center.
Step 2
Select System Configuration > Usage Configuration.
Step 3
 field, select Yes to display meeting times by a 24-hour clock or select No to display 
meeting times by a 12-hour clock.
Step 4
Select Save.
Related Topics
  •
 in the 
 module 
Configuring Parameters that Affect Sound and Video Quality 
Before You Begin
You must enable Quality of Service (QoS) in your network to minimize IP packet loss, packet delay, 
and delay variation (or jitter) of voice packets. In particular, you must enable Differentiated Services 
Code Point (DSCP), also called DiffServ, which is the QoS mechanism supported by Cisco Unified 
MeetingPlace.
Note
The Cisco Unified MeetingPlace default DiffServ settings conform to the recommendations in the 
Cisco Unified Communications Solution Reference Network Design (SRND). If your network already 
conforms to these recommendations, then no QoS configuration is required.