Cisco Cisco Unified MeetingPlace Audio Server Quick Setup Guide

Page of 766
 
Administration Center Page References for Cisco Unified MeetingPlace
Usage Configuration Page
84
 
Bill initiator 
Who gets billed for each reservationless meeting:
  •
Yes—Bill the user who starts the meeting.
  •
No—Bill the meeting owner.
Restriction: This field is always set to No when the 
Allow any profiled user to initiate
 
field is set to No.
Default: Yes
TUI menu is reservationless only 
Whether users can schedule meetings or only start reservationless meetings from the 
TUI
6
.
Default: No
Owner can press 2 in TUI to 
initiate
Whether meeting owners can initiate reservationless meetings more quickly by skipping 
the 
Profile number
 entry.
  •
Yes—Meeting owner can start a reservationless meeting from the TUI waiting room 
by pressing 2 and entering the 
Profile password
.
  •
No—Meeting owner starts the reservationless meeting from the TUI waiting room 
by pressing 3 and entering both the 
Profile number
 and 
Profile password
.
If th
Allow any profiled user to initiate
 field is set to Yes, then any profiled user may 
press 3 to start the reservationless meeting with both the 
Profile number
 and 
Profile 
password
.
Default: No
Alarms
Call capacity MINOR alarm (in 
percentage)
Call capacity MAJOR alarm (in 
percentage)
Specify the percentage of call capacity that triggers a minor and major alarm. 
You can configure minor alarms to be triggered when call capacity is 30–100 percent. 
You can configure major alarms to be triggered when call capacity is 91–100 percent. The 
call capacity percentage for a major alarm must be greater than the percentage for a minor 
alarm.
Call out on major alarm
Phone number to call on alarm
Whether the system places a call to the specified phone number
if an error condition 
affects system operation.
Recommendation: Yes
Restriction: The + character is allowed only as the first character in the field.
Default: No
Outdial Meetings
Number of retry attempts
Number of times the system tries to call each person, when dial out is enabled for a 
meeting. This setting also determines the number of times the system goes through the 
 sequence for each user. 
Default: 2
Delay between retries (sec)
Number of seconds between dial-out retries. This setting also determines the number of 
seconds between each set of 
Restriction: The actual time between dial-out attempts may be longer due to network 
delays.
Default: 300
Table 55
Field Reference: Usage Configuration Page (continued)
Field
Description