Cisco Cisco Unified MeetingPlace 8.6 Quick Setup Guide

To prevent toll fraud, we recommend that you check User Must Change at Next Login. 

Select Save.

If this setting is set, each user will user have to go into http://<CUCM-ipaddress>/ccmuser and change 
their password. The user must in the "Cisco Unified Communications Manager User group on 
Cisco Unified Communications Manager to access this page.

If you want to configure individual end user PINs, proceed to the 

Otherwise, proceed to the 

This task enables Directory Service users to log in to Cisco Unified MeetingPlace over the phone if a 
default credential policy is not in place.

Complete the 

If you are using Cisco Unified Communications Manager 6.x, then complete the 

You perform this task in the Cisco Unified Communications Manager Administration pages. 
Because the pages and menus vary by release, you should check the Cisco Unified 
Communications Manager Administration online help for step-by-step instructions that are specific 
to your release. For details about each field, select Help > This Page.

Go to http://<ccm-server>/ccmadmin/, where <ccm-server> is the fully-qualified domain name or 
IP address of the Cisco Unified Communications Manager server.

Log in with your Cisco Unified Communications Manager administrator username and password.

Select User Management > End User.

Select Find.

Select the User ID.

Configure the PIN and Confirm PIN fields.

If you configured a PIN that may be accessed or guessed by someone other than the intended user, then 
we recommend completing the following steps to prevent toll fraud:

Select Edit Credential.

Check User Must Change at Next Login. 

Select Save.