Cisco Cisco TelePresence Management Suite (TMS) Version 15 Release Notes
Upgrading to Cisco TMS 13.0
Cisco TelePresence Management Suite Release notes
Page 21 of 25
Upgrading to Cisco TMS 13.0
CAUTION: You must back up your configuration before upgrading to 13.0
You must also remember the administrator user name and password for the backup
configuration. You will need these if you ever need to make use of this backup file.
configuration. You will need these if you ever need to make use of this backup file.
Prerequisites and software dependencies
Cisco TMS 13.0 now supports Microsoft Windows Server 2008 64bit OS and Microsoft SQL
server 2008 (32 and 64 bit)
server 2008 (32 and 64 bit)
Cisco TMS 13.0 requires Microsoft.NET4. The installer will inform you that this is required before
the installation can be made if .NET4 is not installed beforehand.
the installation can be made if .NET4 is not installed beforehand.
If you are to installing SQL Server 2008 on the same server as Cisco TMS, .NET 2.0 SP2 is
required.
required.
Upgrade instructions
Cisco TMS 13.0 uses a full installation program for both new installations of Cisco TMS and upgrades
of previous Cisco TMS versions. Refer to the
of previous Cisco TMS versions. Refer to the
If upgrading from a version older than TMS 12.2, the onetime database clean-up included in the TMS
12.2 release will be executed. This may add significant time to the time required for the installer to
complete. For more details on this update, see the release notes for TMS 12.0 and onwards.
12.2 release will be executed. This may add significant time to the time required for the installer to
complete. For more details on this update, see the release notes for TMS 12.0 and onwards.
Warning: There is a software dependency between TMS 12.0 and VCS X5. Installations
using the TMS Provisioning directory functionality for Cisco TelePresence Movi deployments
and upgrading TMS from either 12.1, 12.2 or 12.5 must follow the upgrade procedures found
using the TMS Provisioning directory functionality for Cisco TelePresence Movi deployments
and upgrading TMS from either 12.1, 12.2 or 12.5 must follow the upgrade procedures found
in the document
When installing and upgrading to Cisco TMS 13.0, Cisco recommends upgrading the Device
Provisioning and VCS Database components on the Cisco VCS. The VCS must be running or
upgraded to X5.1.1 before installing these components. This can be done on the Cisco VCS by
going to Maintenance > Upgrade and selecting the relevant upgrade component file. The files for
these components (*.tlp files) can be found on the zip file. Replication between the Cisco TMS and
Cisco VCS(s) should be disabled when upgrading these components.
Note: The TMS Agent components (Device Provisioning and VCS Database) contained on VCS X5.2
equate to the TMS Agent components in TMS 12.6 and 13.0. Therefore, it is not necessary to
upgrade these components on a VCS running X5.2.
During initial Cisco TMS 13.0 installs, the Enable TMS Agents found under Administrative Tools >
General Settings is now set to No by default. To enable the TMS Agent in the Cisco TMS, the
administrator must set this to Yes. Cisco recommends that after setting the Enable TMS Agents to
Yes in the Cisco TMS, that the administrator confirm that the Local TMS Agent in the TMS Agent
Diagnostics shows no errors and that all diagnostic tests are in the green. The TMS Agent
Diagnostics can be found under Administrator Tools > TMS Agent Diagnostics. If any errors are
found on the Local TMS Agent, then these errors need to be fixed before proceeding with replication
to the Cisco VCS(s). Refer to the Diagnostic section within the Provisioning Deployment Guide for
13.0 and X5.1.1 for troubleshooting any errors found on the Local TMS Agent or contact your local
Cisco partner or customer support for assistance.
Upgrades will be blocked if the procedures found in this document are not followed appropriately. The
error message will state that Provisioning on all clusters must be disabled before upgrading to 13.0.
equate to the TMS Agent components in TMS 12.6 and 13.0. Therefore, it is not necessary to
upgrade these components on a VCS running X5.2.
During initial Cisco TMS 13.0 installs, the Enable TMS Agents found under Administrative Tools >
General Settings is now set to No by default. To enable the TMS Agent in the Cisco TMS, the
administrator must set this to Yes. Cisco recommends that after setting the Enable TMS Agents to
Yes in the Cisco TMS, that the administrator confirm that the Local TMS Agent in the TMS Agent
Diagnostics shows no errors and that all diagnostic tests are in the green. The TMS Agent
Diagnostics can be found under Administrator Tools > TMS Agent Diagnostics. If any errors are
found on the Local TMS Agent, then these errors need to be fixed before proceeding with replication
to the Cisco VCS(s). Refer to the Diagnostic section within the Provisioning Deployment Guide for
13.0 and X5.1.1 for troubleshooting any errors found on the Local TMS Agent or contact your local
Cisco partner or customer support for assistance.
Upgrades will be blocked if the procedures found in this document are not followed appropriately. The
error message will state that Provisioning on all clusters must be disabled before upgrading to 13.0.