Fujifilm Transfers Leaflet
S ER ICOL
Product Information
Metatran Foil Transfer System
The Metatran Foil Transfer System comprises a screen
printable adhesive plus heat transfer foils, for the production
of mirror finish metallic prints onto cotton and many synthetic
fabrics.
Metatran Adhesive is first printed and partially cured on the
Metatran Adhesive is first printed and partially cured on the
substrate. Metatran foil, carried on a polyester film, is then
applied by heat press. Removing the polyester carrier film
leaves the metallic foil adhered to the printed adhesive.
A two-step transfer process may alternatively be used.
The end uses of foil transfers are novelty and fashion.
Metatran Adhesive and Metatran Foils are Phthalate Compliant
A two-step transfer process may alternatively be used.
The end uses of foil transfers are novelty and fashion.
Metatran Adhesive and Metatran Foils are Phthalate Compliant
(1)
.
Production of Metatran Foil Transfers
Three options are available for the production of foil transfers:
Method 1: Hybrid Transfer System
Print image using Metatran Adhesive directly onto the fabric, set
and then apply Metatran foil to adhesive image using a transfer
press.
Mesh: 34-62.
Drying: Heat Set at 120-140°C for 1-2 minutes.
Transfer Schedule: 170-180°C for 15-20 seconds.
(Allow the transfer to cool before removing the foil.)
Method 2: Two Step Transfer Process
Print Metatran Adhesive image onto transfer paper, then transfer
onto the garment. Allow to cool, then transfer Metatran foil onto
the adhesive.
Mesh: 43-62.
Transfer Paper: TRW29, TRB08, TRB20 transfer paper.
Drying: Heat Set at 110-120°C for 30-60 seconds
Transfer Schedule: 170-180°C for 15-20 seconds
(Allow adhesive transfer and foil transfer to cool before removing
carrier.)
Method 3: Short Run Printing
For short runs, the Metatran Adhesive may be printed directly onto
the foil and then transferred. The foil should be held in place by a
vacuum table.
Mesh: 43-62
Drying: Heat set at 110-120°C for 30-60 seconds.
Transfer Schedule: 170-180°C for 15-20 seconds.
(Allow the transfer to cool before removing carrier.)
Due to the complex nature of decorating garments with transfers,
Due to the complex nature of decorating garments with transfers,
customers must confirm suitability through pre-production
testing.
Fastness/Resistance
Wash: Up to 40°C.
Dry Clean: Not Suitable.
Direct Iron: Not Suitable.
Industrial: Not Suitable.
Transfer Equipment
Flat Bed Transfer Press
Products Required
ON421 Metatran Adhesive
ON591 Advantage ON Thinner
Available in 5 ltr containers.
Available in 5 ltr containers.
Metatran Transfer Foils
KFT23 Gold
KFT24
Silver
KFT26
Metallic Red
KFT27
Metallic Blue
KFT28 Metallic Green
KFT32
Bronze
KFT33
Copper
KFT34 Metallic Fuchsia
KFT35
Clear
KFT36 Gunmetal
KFT37
Platinum
Rolls 750mm x 100m.