SINGER 3337 SIMPLE Instruction Manual

  Overedge Stitch  

1.  Set the Stitch Selector Dial, so that the Overedge stitch setting is 

directly below the dot. 

2.  Set the Stitch Length Dial control so that the S1 setting is below 

the dot. 

3.  Place the fabric under the All-Purpose Foot with the right-hand 

edge of the fabric lined up with the desired seam guide line on 

the right side of the needle plate. Lower the presser foot, then 

step on the foot control to begin sewing.  

Stitch Length Dial

Stitch Selector Dial

A stretch stitch is used for knit fabrics. This type of seam will stretch with the fabric.   

(Go to www.singerco.com to view other stretch stitches that can be used).

HOW TO:
1.  Set the machine to the desired stitch by setting the Stitch Selector Dial to one of the stretch stitch 

settings. (see page 19) 

2.  Set the Stitch Length Dial to the Stretch S1 setting for the blue stitches or S2 for the red stitches. 

(see page 19)