SINGER SE340 LEGACY Instruction Manual

50

1. Press the Embroidery Option tab.

 <RXFDQDFFHVVHPEURLGHU\RSWLRQVE\SUHVVLQJWKH

buttons, as shown below:

 $+RRS2SWLRQDQG6HOHFWLRQ

  B. Tracing

  C. Basting

  D. Monochrome

The top right button shows the hoop size selected. Press this 

button to select a hoop position or to change the hoop size.

:KHQ\RXSUHVVWKH+RRS2SWLRQDQG6HOHFWLRQEXWWRQWKH

+RRS2SWLRQVFUHHQZLOODSSHDU¿UVW

<RXFDQPRYHWKHKRRSWRWKHIROORZLQJSRVLWLRQV

i. Current Position:

When you want to return to the current stitch and start 

embroidering again where the embroidery was interrupted, 

press this button.

Hoop will move to current positon and return to embroidery 

option screen.

 NOTE:

 <RXFDQDOVRSUHVVWKH³✓´EXWWRQWRUHWXUQWRFXUUHQW

positon and Embroidery Option screen. 

ii. Cut Position:

By pressing this button, move the hoop towards you, 

making it easier to trim fabric when embroidering an 

DSSOLTXp

iii. Park Position:

 :KHQ\RXUHPEURLGHU\LV¿QLVKHGDQG\RXZDQWWRVWRUH

your machine, it will be necessary to move the hoop 

carriage to Park position. Press the Park position button.

:KHQWKHSRSXSPHVVDJHYDSSHDUVUHPRYHWKHKRRS

DQGSUHVVWKH³✓´EXWWRQ7KHFDUULDJHZLOOWKHQPRYHWR

the correct position for storage.

Then, turn off the power switch and remove the unit.

 NOTE:

It is very important that the hoop is removed, otherwise it 

may be damaged.

iv. Center Position:

If you want to check where the center position of the hoop 

will be placed on the fabric, press this button.

NOTE:

:KHQKRRSLVQRWDWWDFKHGEXWWRQV³LLLY³ZLOOEHGLVDEOHG