SINGER SE340 LEGACY Instruction Manual

51

When you select the design, machine will select most suitable 

hoop automatically.

1. To change the hoop, press the second tab to open the hoop

list.

 6HOHFWWKHKRRS\RXZDQWWRXVH

The hoop list can be scrolled by pressing the right side 

arrow buttons.

Only hoops that are big enough for the selected design will 

be possible to select. 

Hoops that are too small are marked with an X and cannot 

be selected.

 6HOHFWHGKRRSLVPDUNHGZLWKDEODFNGRW

 3UHVVWKH´✓´EXWWRQ+RRSVL]HZLOOFKDQJHDQGWKH

Embroidery Option screen will appear.

 $WWKLVWLPHDOOHGLWVURWDWLRQPLUURULQJDQGVFDOLQJZLOOEH

UHVHW,I\RXGRQ¶WZDQWWKLVSUHVVWKH³;´EXWWRQH+RRS

size and edits will not change and return to the Embroidery 

Option screen.

NOTE:

If the hoop you have selected is not the same as the hoop 

attached to the embroidery unit, a pop-up will appear to inform 

you of this.  Attach the correct hoop or select another hoop 

from the list.

Hoops 260x150 and 100x100 are provided with this machine.

The Tracing function can be used to trace around the design 

area. Press the second button to move the hoop so the needle 

is placed in the upper left corner of where the design will be 

embroidered. Each press of the button will move the hoop to 

view all corners of the design. 

2QWKH¿IWKSUHVVWKHKRRSZLOOPRYHWRWKHFHQWHUSRVLWLRQ

of the design and on the sixth press it will move back to its 

original position.

The Tracing button will indicate the position by highlighting 

mark.

%\SUHVVLQJWKHWKLUGEXWWRQDQGSUHVVLQJWKH6WDUW6WRSEXWWRQ

machine will sew a basting stitch around the design area as a 

box.

Basting enables you to secure your fabric to a stabilizer placed 

beneath it, especially when the fabric to be embroidered 

cannot be hooped. Basting can also provide added support, 

especially for unstable fabrics. 

NOTE:

During basting, the design box will be indicated with a dashed 

line and Basting button will be highlighted. 

Press the fourth button to activate monochrome embroidery. 

The machine will not stop for color block changes. Press the 

button again to deactivate monochrome embroidery.

When Monochrome is activated, this button will be highlighted.