Cisco Headend System Release 2.7 Installation Guide
Install the Service Pack
4023737 Rev C
61
SAIgoqam GOQAM Modulator
V1.1.4
SAIncrypt Netcrypt
V1.2.12
pkgparam: ERROR: unable to locate parameter information for "SAIqpsk"
pkgparam: ERROR: unable to locate parameter information for "SAIqpsk"
SAIqpsk
*************************************************************************
Are you SURE you want to continue? [y,n,?,q]
Note: The SAIqpsk package is not being installed. The above ERROR for
SAIqpsk can be ignored.
SAIqpsk can be ignored.
5 Type y and then press Enter. The software begins to install on the DNCS.
Note: When the interactive mode is enabled, the system displays a message
similar to the following example.
similar to the following example.
******************************************************************
Copyright (c) 1998-2007 Cisco.
All Rights Reserved
This product is protected by copyright and distributed under
licenses restricting copying, distribution and decompilation.
******************************************************************
Hit <CR> to continue...
6 Press Enter to continue. The system displays a message that asks whether you
have backed up the DNCS host and the DNCS database.
7 Have you backed up the DNCS file systems and database?
If yes, type y and then press Enter.
If no, type n and then press Enter.
Note: If you type n, the installation will terminate. Back up the file systems
and database and then repeat this procedure from step 4.
Note: If you type n, the installation will terminate. Back up the file systems
and database and then repeat this procedure from step 4.
8 Choose one of the following options to configure dbOptimizer:
Enter the number of days passed, or type d (lower-case D) for the default
value of 90 days
value of 90 days
Press Enter to accept the default value
Note: You can determine the current setting by using the cat command to
examine the /dvs/dncs/bin/CED.in file.
examine the /dvs/dncs/bin/CED.in file.