Cisco Headend System Release 2.7 Installation Guide
Reinstall SAItools 4.2.0.13p5
4023737 Rev C
63
Reinstall SAItools 4.2.0.13p5
Introduction
When Solaris Patch 4.2.1.10 is installed, it installs SAItools 4.2.0.13p5 to support
some of the Solaris patches. Service Pack 3 (SP3) installs SAItools 4.2.0.13p2.
some of the Solaris patches. Service Pack 3 (SP3) installs SAItools 4.2.0.13p2.
If you have not yet installed Solaris Patch 4.2.1.10, go to Check the Installed
Software Version (on page 68). If you installed Solaris Patch 4.2.1.10 prior to
installing SP3, you must re-install Solaris Patch 4.2.1.10.
Software Version (on page 68). If you installed Solaris Patch 4.2.1.10 prior to
installing SP3, you must re-install Solaris Patch 4.2.1.10.
Complete the following steps to reinstall the SAItools package.
Important: This procedure will have you edit the /etc/system file first on the DNCS
and then on the SARA Application Server.
1 Insert the CD labeled Solaris Patch 4.2.1.10.
2 Type /cdrom/cdrom0/tools/install_patch and press Enter.
3 Type y and then press Enter. The package is installed on the DNCS.
4 Did the "Installation of <SAItools> successful" message appear?
and then on the SARA Application Server.
1 Insert the CD labeled Solaris Patch 4.2.1.10.
2 Type /cdrom/cdrom0/tools/install_patch and press Enter.
3 Type y and then press Enter. The package is installed on the DNCS.
4 Did the "Installation of <SAItools> successful" message appear?
If yes, go to step 5.
If no, contact Cisco Services for assistance.
5 Type cd /var/sadm/system/logs and then press Enter.
6 Open the SAItools log file and look for any errors, warnings, or failures.
7 Are any errors, warnings, or failures present?
6 Open the SAItools log file and look for any errors, warnings, or failures.
7 Are any errors, warnings, or failures present?
If yes, contact Cisco Services for assistance.
If no, go to step 8.