Cisco Headend System Release 2.5 Installation Guide
Configure the ALOM Port
4022447 Rev B
15
18 Type console -f and press Enter. A message appears that instructs you how to
return to the ALOM port, if needed.
19 Press Enter again.
Results:
Control transfers to the console of the RNCS server (rather than the ALOM
port).
port).
The ok prompt appears.
Choices Regarding Installation
The server is now ready for the installation of RNCS software. You have the
following two options:
following two options:
Telnet from the DNCS to the just-configured ALOM port by following the
instructions in Connecting to the Console of the RNCS Server (on page 16).
Note: We recommend that you select this option to test the just-configured
ALOM port.
instructions in Connecting to the Console of the RNCS Server (on page 16).
Note: We recommend that you select this option to test the just-configured
ALOM port.
Use the laptop to install the RNCS software by following the instructions in
Install the RNCS Software (on page 17).
Install the RNCS Software (on page 17).