Cisco Cisco TelePresence MCU 4510 Maintenance Manual
Configuring network and system settings
Cisco TelePresence MCU 4.3 Product administration guide
Page 171 of 242
Ethernet configuration
These settings determine the Ethernet settings for the appropriate port of the MCU. Refer to the table for
assistance with these settings. When you have finished, click Update Ethernet configuration.
assistance with these settings. When you have finished, click Update Ethernet configuration.
Field
Field description
Usage tips
Ethernet
settings
settings
Specify whether you want this Ethernet port
to automatically negotiate its Ethernet
settings with the device it is connected to,
or if it should use the values that you
specify in the Manual configuration fields
below.
to automatically negotiate its Ethernet
settings with the device it is connected to,
or if it should use the values that you
specify in the Manual configuration fields
below.
It is important that your Ethernet settings match those
of the device to which this port is connected. For
example, both devices must be configured to use
automatic negotiation, or both configured with fixed
and matching speed and duplex settings (see below).
of the device to which this port is connected. For
example, both devices must be configured to use
automatic negotiation, or both configured with fixed
and matching speed and duplex settings (see below).
Manual configuration
Speed
Identifies the connection speed: 10 Mbit/s
or 100 Mbit/s. Use automatic negotiation if
a connection speed of 1000 Mbit/s is
required.
or 100 Mbit/s. Use automatic negotiation if
a connection speed of 1000 Mbit/s is
required.
The connection speed must match that of the device to
which this port is connected.
which this port is connected.
You only need to select this option if you have chosen
Manual Ethernet settings, as described above.
Manual Ethernet settings, as described above.
Duplex
Identifies the connection duplex mode:
n
Full duplex
Both devices can send data to each other
at the same time
Both devices can send data to each other
at the same time
n
Half duplex
Only one device can send to the other at
a time
Only one device can send to the other at
a time
The duplex setting must match that of the device to
which this port is connected.
which this port is connected.
You only need to select this option if you have chosen
Manual Ethernet settings, as described above.
Manual Ethernet settings, as described above.