Cisco Cisco TelePresence MCU 4510 Maintenance Manual
Displaying system status
Cisco TelePresence MCU 4.3 Product administration guide
Page 189 of 242
Statistics for which there is no set maximum are displayed as A (B), where A and B have the meanings
described above.
described above.
Where the highest value attained is shown in parentheses (i.e. B in the above example), this value can be
reset by selecting Reset maximum values. These values can be useful in monitoring peak MCU usage over
a period of time.
reset by selecting Reset maximum values. These values can be useful in monitoring peak MCU usage over
a period of time.
Conference status
Conference status displays an overview of active and completed conferences.
Field
Field description
Active
conferences
conferences
The number of conferences that are currently configured on the MCU.
Active auto
attendants
attendants
The number of auto attendants that are currently in use. If you dial in with an endpoint to the
auto attendant, this will go up by one. It does not reflect the number of configured auto
attendants.
auto attendant, this will go up by one. It does not reflect the number of configured auto
attendants.
Completed
conferences
conferences
The number of conferences that were once active but are now not.
Completed
auto
attendants
auto
attendants
The total number of calls into an auto attendant, excluding any in progress. If you call an auto
attendant and enter into a conference or hang up the call, this number increases by one.
attendant and enter into a conference or hang up the call, this number increases by one.
Active
conference
participants
conference
participants
The number of people currently in conferences.
Previous
conference
participants
conference
participants
The number of people who were previously participating in a conference (since the last time
the MCU restarted).
the MCU restarted).
Active
streaming
viewers
streaming
viewers
The number of people currently watching conferences via a streaming application, such as
Apple QuickTime or RealPlayer.
Apple QuickTime or RealPlayer.
TCP streaming
viewers
viewers
The number of streaming sessions out of the Active streaming viewers value shown above
which are using TCP media transport rather than UDP.
which are using TCP media transport rather than UDP.
ConferenceMe
users
connected
users
connected
The number of users currently connected to a conference using the ConferenceMe software
endpoint. To change the number of allowed ConferenceMe participants, go to
endpoint. To change the number of allowed ConferenceMe participants, go to
Settings >
Streaming
.
See
.
Video ports in
use
use
This value is shown if the MCU is not operating in
, and shows the
number of video ports in use. This corresponds to the number of connected participants that
are either contributing or being sent video, plus the number of conferences for which streaming
is active.
are either contributing or being sent video, plus the number of conferences for which streaming
is active.