Cisco Cisco TelePresence MCU 4510 Maintenance Manual
Configuring Network and System Settings
Configuring Network Settings
To configure the network settings on the MCU and check the network status, go to Network > Port A or
Network > Port B.
Network > Port B.
The MCU has two Ethernet interfaces, Port A and Port B. The configuration pages for the two interfaces look and
behave similarly, and so are described together. Differences will be noted as appropriate.
behave similarly, and so are described together. Differences will be noted as appropriate.
Port A and Port B can be configured to be allocated their IP addresses by DHCP (IPv4) or SLAAC/DHCPv6 (IPv6).
Connect Port A to your local network and connect Port B to a second subnet or the internet depending on your
application of the MCU.
Connect Port A to your local network and connect Port B to a second subnet or the internet depending on your
application of the MCU.
On this page:
■
■
■
■
IP Configuration Settings
These settings determine the IP configuration for the appropriate Ethernet port of the MCU. When you have finished,
click Update IP configuration.
click Update IP configuration.
Field
Field Description
Usage Tips
Cisco Systems, Inc.
136