Cisco Cisco TelePresence MCU 4510 Maintenance Manual
Shell not
secured for
startup
secured for
startup
Disable the serial input
during startup.
during startup.
If Disable serial input during startup isn't selected, the serial
console is not protected during application startup. This means
users will have access to debug services in the operating system.
console is not protected during application startup. This means
users will have access to debug services in the operating system.
To disable this, go to Settings > Security, and select Disable
serial input during startup.
serial input during startup.
Related Topics
■
■
■
Logging Using Syslog
You can send the
to one or more syslog servers on the network for storage or analysis.
To configure the syslog facility, go to Logs > Syslog.
On this page:
■
■
Syslog Settings
Refer to this table for assistance when configuring Syslog settings:
Field
Field Description
Usage Tips
Host
address
1 to 4
address
1 to 4
Enter the IP addresses of up to four
Syslog receiver hosts.
Syslog receiver hosts.
The number of packets sent to each configured host will be
displayed next to its IP address.
displayed next to its IP address.
210
Cisco TelePresence MCU Series Online Printable Help