Cisco Cisco TelePresence MCU 4510 Maintenance Manual
SIP
registrar
registrar
The status of an auto attendant with respect to its SIP registration. The
possible states are:
possible states are:
■
n/a
This auto attendant is not configured to be registered with the
SIP registrar; because of this, there is no applicable registration
status to show.
status to show.
■
Registering
This auto attendant is in the process of registering with the SIP
registrar.
■
Deregistering
The auto attendant is in the process of unregistering with the SIP
registrar. This might occur if:
—
SIP registration has been turned off (either for that auto
attendant only or for the entire MCU)
attendant only or for the entire MCU)
—
The configured SIP registrar has just been changed and the
MCU is in the process of unregistering from the previous SIP
registrar before registering its auto attendants with the new
one.
MCU is in the process of unregistering from the previous SIP
registrar before registering its auto attendants with the new
one.
■
Re-registration pending / Retry timeout
If the MCU fails to register an auto attendant with the SIP
registrar, it enters these states temporarily before re-attempting
the registration.
the registration.
■
<number> registered
The auto attendant has been registered successfully with the SIP
registrar and can be contacted using the number indicated.
For tips on configuring
SIP, see
SIP, see
Security
Whether a PIN has been configured to restrict access to the auto
attendant
attendant
Calls
The total number of calls received by the auto attendant since the last
restart
restart
Banner
A thumbnail of the custom banner, if one has been specified
Related Topics
■
■
Adding and Updating an Auto Attendant
Auto attendants simplify the way participants can join conferences. By calling an auto attendant using their video
endpoint, a participant can choose from menu options and join or start conferences. No gateway or gatekeeper is
required. (The auto attendant is configured on the MCU.)
endpoint, a participant can choose from menu options and join or start conferences. No gateway or gatekeeper is
required. (The auto attendant is configured on the MCU.)
Adding an Auto Attendant
To add an auto attendant:
1.
Go to Conferences.
2.
Click the Auto attendants tab.
3.
Click Add new auto attendant.
92
Cisco TelePresence MCU Series Online Printable Help