Cisco Cisco TelePresence MCU 4510 Maintenance Manual
Displaying conference status
Cisco TelePresence MCU Version 4.2 Printable online help
Page 207 of 252
Displaying conference status
The Conference status page displays the status of active and completed conferences and video and
audio processing. To access this information, go to Status > Conferences.
audio processing. To access this information, go to Status > Conferences.
Refer to the table below for assistance in interpreting the information displayed:
For information about the number and type of ports provided by each MCU model, refer to
Format of displayed values
In many cases, the values displayed on this page are shown in the format
A (B) / C
; this represents:
A
– the current value of this statistic
B
– the maximum achieved value of this statistic (since last reset)
C
– the maximum allowable number for this statistic (this varies by MCU model)
Note that, for MSE Media and Media2 blades, the maximum value (
C
above) for the "ports in use"
fields depends on the number of port licenses allocated to the blade. One port license is required for
standard definition (SD) ports, two for each high definition (HD) port.
standard definition (SD) ports, two for each high definition (HD) port.
Statistics for which there is no set maximum are displayed as
A (B)
, where
A
and
B
have the meanings
described above.
Where the highest value attained is shown in parentheses (i.e.
B
in the above example), this value can
be reset by selecting Reset maximum values. These values can be useful in monitoring peak MCU
usage over a period of time.
usage over a period of time.
Conference status
Conference status displays an overview of active and completed conferences.
Field
Field description
Active conferences
The number of conferences that are currently configured on the MCU.
Active auto attendants
The number of auto attendants that are currently in use. If you dial in
with an endpoint to the auto attendant, this will go up by one. It does
not reflect the number of configured auto attendants.
with an endpoint to the auto attendant, this will go up by one. It does
not reflect the number of configured auto attendants.
Completed conferences
The number of conferences that were once active but are now not.
Completed auto attendants
The total number of calls into an auto attendant, excluding any in
progress. If you call an auto attendant and enter into a conference or
hang up the call, this number increases by one.
progress. If you call an auto attendant and enter into a conference or
hang up the call, this number increases by one.
Active conference
participants
participants
The number of people currently in conferences.
Previous conference
participants
participants
The number of people who were previously participating in a
conference (since the last time the MCU restarted).
conference (since the last time the MCU restarted).