Cisco Cisco TelePresence MCU 4510 Maintenance Manual
Displaying cluster status
Displaying the cluster status of a master MCU
This topic only applies to clustered MCU MSE 8510s.
To display cluster status, go to
Status > Cluster
.
Cluster status is only available for MCU MSE 8510s that are configured on the MSE 8050 Supervisor to be
part of a cluster. For more information about clustering, refer to
part of a cluster. For more information about clustering, refer to
The table below describes the
Status > Cluster
page that displays for the master MCU in a cluster. For
information about what details are displayed for a slave, see
.
The master MCU in a cluster inherits all the ports and port licenses from the slave MCUs in the cluster.
Field
Field description
Usage tips
Slot
The number of the slot in the
MSE chassis to which this row in
the table refers.
MSE chassis to which this row in
the table refers.
To configure an MCU MSE 8510 as a master or a slave in a
cluster, go to the web interface of the MSE 8050 Supervisor in
the chassis which houses the MCU MSE 8510.
cluster, go to the web interface of the MSE 8050 Supervisor in
the chassis which houses the MCU MSE 8510.
IP
The IP address of a slave MCU
or Master.
or Master.
Cisco TelePresence MCU Series 4.5 Online Printable Help
Page 229 of 278
Displaying system status
Displaying cluster status