Cisco Cisco TelePresence Management Suite (TMS) Version 15 Installation Guide
Configuring how Cisco VCS handles calls to unknown IP
addresses
addresses
The Calls to unknown IP addresses setting determines the way in which the Cisco VCS attempts to call
systems which are not registered with it or one of its neighbors.
systems which are not registered with it or one of its neighbors.
It is configured on the
Dial plan configuration
page (
Configuration > Dial plan > Configuration
).
VCS Control
On the VCS Control, set Calls to unknown IP addresses to Indirect.
VCS Expressway
If you are using a VCS Expressway, Calls to unknown IP addresses must be set to Direct.
Adding Cisco VCS to Cisco TMS
This procedure is compulsory for the Cisco VCS (or Cisco VCS cluster) on which provisioning is enabled
(typically the VCS Control), and optional for other Cisco VCSs (a VCS Expressway, for example).
(typically the VCS Control), and optional for other Cisco VCSs (a VCS Expressway, for example).
In each Cisco VCS:
1. We recommend enabling SNMP as this is the best way for Cisco TMS to be able to detect and add the
Cisco VCS:
l
Go to
System > SNMP
and ensure that SNMP mode is set to v3 plus TMS support and that a
Community name is set.
Cisco TelePresence Management Suite Provisioning Extension with Cisco VCS Deployment Guide (1.2)
Page 17 of 88
Configuring Cisco VCS for provisioning