Cisco Cisco TelePresence Management Suite (TMS) Version 15 Installation Guide
Characters allowed in SIP URIs
The following character set is allowed in SIP URIs (further details may be found in RFC 3261):
a-z / A-Z / 0-9 / "-" / "_" / "." / "!" / "~" / "*" / "'"/ "(" / ")" "&" / "=" / "+" / "$" / "," / ";" / "?" / "/"
If other characters are needed they must be “escaped” using "%" followed by a pair of hexadecimal digits that
represents the ASCII value for the required character.
represents the ASCII value for the required character.
For example, "alice smith@example.com" must be encoded as alice%20smith@example.com (where %20
represents the space character).
represents the space character).
FindMe limitations
Microsoft Lync device IDs as FindMe devices
If Caller ID (
Applications > FindMe
) is configured to use the FindMe ID, so that the FindMe ID rather than
the device's own endpoint ID is presented as the caller ID when making calls, Lync device IDs must not be
included as a device in that FindMe. (Lync does not support the To: or From: name changing in response
messages, which is how the Cisco VCS sets the Caller ID to show as the FindMe ID).
included as a device in that FindMe. (Lync does not support the To: or From: name changing in response
messages, which is how the Cisco VCS sets the Caller ID to show as the FindMe ID).
To associate video endpoints and Lync devices, the Cisco VCS's B2BUA for Lync devices should be
enabled and the FindMe ID should be made the same as the Lync URI.
enabled and the FindMe ID should be made the same as the Lync URI.
Phone numbers from Active Directory (AD)
If user accounts within Cisco TMS are created from AD, the Phone number value is sourced from the AD
Office Phone number.
Office Phone number.
For the phone number to be valid for an ISDN gateway (for the ISDN gateway to use it as a caller ID) the
format of the AD Office Phone number must be acceptable to the ISDN gateway.
format of the AD Office Phone number must be acceptable to the ISDN gateway.
This typically means that the AD Office Phone number must be:
n
a numeric string containing no brackets, spaces, hyphens or other non-digit characters
n
a phone number which is configured by the network to terminate on the ISDN gateway
n
in the correct format for the ISDN network, for example:
l
full number including country code: 441189123456
l
local number: 123456
l
extension number: 3456
Check the acceptable format with your ISDN supplier.
Cisco TelePresence Management Suite Provisioning Extension with Cisco VCS Deployment Guide (1.2)
Page 71 of 88
Deploying FindMe