Cisco Cisco Web Security Appliance S690 User Guide
W O R K I N G W I T H M U L T I P L E A P P L I A N C E S A N D R O U T E R S
C H A P T E R 3 : D E P L O Y M E N T
39
Example 3
Suppose you have the WCCP service shown in Figure 3-5.
Figure 3-5 Example WCCP Service — Dynamic Service, Password Required
In this example, the WCCP service defines a dynamic service group with service ID of 120.
The redirection basis is on the destination port, and it has enabled a password for this service
group of “admin99” (hidden in the appliance configuration). Also suppose in this example
that you want to configure the ethernet0 interface on the router for this service group.
The redirection basis is on the destination port, and it has enabled a password for this service
group of “admin99” (hidden in the appliance configuration). Also suppose in this example
that you want to configure the ethernet0 interface on the router for this service group.
Use the following WCCP configuration for this example:
Working with Multiple Appliances and Routers
When you connect one or more Web Security appliances to one or more WCCP routers, you
have a cluster. You can include up to 32 appliances and up to 32 routers in a cluster. You must
configure all appliances and routers in a cluster to communicate with each other.
have a cluster. You can include up to 32 appliances and up to 32 routers in a cluster. You must
configure all appliances and routers in a cluster to communicate with each other.
ip wccp version 2
ip wccp 120
interface ethernet0
ip wccp 120 redirect in
ip wccp 120 password admin99
ip wccp 120
interface ethernet0
ip wccp 120 redirect in
ip wccp 120 password admin99