Cisco Cisco uBR-MC3Gx60V-RPHY Broadband Processing Engine Installation Guide
25
Cisco uBR10-MC5X20S/U/H Cable Interface Line Card Hardware Installation Guide
OL-18277-03
Using the Universal Cable Holder on Cisco uBR10-MC5X20 Line Cards
Removing the UCH from the Cisco uBR10-MC5X20S/U/H Cable Interface Line
Card
Card
Note
The UCH1 or UCH2 universal cable holders may be used with the Cisco uBR10-MC5X20S/U/H cable
interface line cards. For more information, see the
interface line cards. For more information, see the
show the UCH1 being removed from the cable line card. The removal process
is the same for the UCH2.
Caution
Make sure you are properly grounded with an ESD-preventative ground strap.
Step 1
Carefully move the cables away from the front of the card so that you can easily reach the leadscrew on
the UCH.
the UCH.
Step 2
Use the flathead screwdriver to loosen the leadscrew on the UCH. Turn the leadscrew counterclockwise.
(See
(See
Step 3
Unscrew the leadscrew until it is completely out of the faceplate on the line card.