Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP Release Notes
6
Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Release Notes, Cisco IOS Release 12.2(35)SE and later
459515-002
Major Features
Major Features
This release supports web authentication for authenticating a supplicant (client) that does not support
IEEE 802.1x functionality. For more information, see the
IEEE 802.1x functionality. For more information, see the
.
Minimum Cisco IOS Release for Major Features
lists the minimum software release required to support the major features on this switch.
Limitations and Restrictions
You should review this section before you begin working with the switch. These are known limitations
that will not be fixed, and there is not always a workaround. Some features might not work as
documented, and some features could be affected by recent changes to the switch hardware or software.
that will not be fixed, and there is not always a workaround. Some features might not work as
documented, and some features could be affected by recent changes to the switch hardware or software.
This section contains these limitations:
•
•
•
Cisco IOS Limitations
These limitations apply to CGESM switch:
•
•
Table 3
CGESM Switch Features and the Minimum Cisco IOS Release Required
Feature
Minimum Cisco IOS
Release Required
Release Required
Web authentication
12.2(35)SE
Support for DSCP transparency
12.2(25)SE1
Support for VLAN-based QoS and hierarchical policy maps on SVIs 12.2(25)SE1
Device manager
12.2(25)SE1
Support for SSL version 3.0 for secure HTTP communication
(cryptographic images only)
(cryptographic images only)
12.2(25)SE1
802.1x accounting and MIBs (IEEE8021-PAE-MIB and
CISCO-PAE-MIB)
CISCO-PAE-MIB)
12.2(25)SE1
Flex Links
12.2(25)SE1
HTTP software upgrade (device manager only)
12.2(25)SE1
SFP module diagnostic-management interface
12.2(25)SE1
Smartports macros
12.2(25)SE1