Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP Release Notes
7
Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Release Notes, Cisco IOS Release 12.2(40)SE
460160-001
Limitations and Restrictions
Limitations and Restrictions
You should review this section before you begin working with the switch. These are known limitations
that will not be fixed, and there is not always a workaround. Some features might not work as
documented, and some features could be affected by recent changes to the switch hardware or software.
that will not be fixed, and there is not always a workaround. Some features might not work as
documented, and some features could be affected by recent changes to the switch hardware or software.
This section contains these limitations:
•
•
•
Cisco IOS Limitations
These limitations apply to CGESM switch:
•
•
•
•
•
•
•
•
•
•
•
Configuration
These are the configuration limitations:
•
If you run the CLI-based setup program, the IP address that the Dynamic Host Configuration
Protocol (DCHP) provides is reflected as a static IP address in the config.text file. The workaround
is to not run setup if DHCP is required for your configuration.
Protocol (DCHP) provides is reflected as a static IP address in the config.text file. The workaround
is to not run setup if DHCP is required for your configuration.
•
If you start and then end the autoinstall program before the DHCP server replies, DHCP requests
are ignored. The workaround is to wait until you see the IP address appear when it is provided by
the DCHP server.
are ignored. The workaround is to wait until you see the IP address appear when it is provided by
the DCHP server.
SFP module diagnostic-management interface
12.2(25)SE1
Smartports macros
12.2(25)SE1
Table 3
CGESM Switch Features and the Minimum Cisco IOS Release Required (continued)
Feature
Minimum Cisco IOS
Release Required
Release Required