Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP Technical References
2-204
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem Command Reference Guide
380265-002
Chapter 2 CGESM Switch Cisco IOS Commands
mls qos srr-queue output cos-map
mls qos srr-queue output cos-map
Use the mls qos srr-queue output cos-map global configuration command to map class of service
(CoS) values to an egress queue or to map CoS values to a queue and to a threshold ID. Use the no form
of this command to return to the default setting.
(CoS) values to an egress queue or to map CoS values to a queue and to a threshold ID. Use the no form
of this command to return to the default setting.
mls qos srr-queue output cos-map queue queue-id {cos1...cos8 | threshold threshold-id
cos1...cos8}
no mls qos srr-queue output cos-map
Syntax Description
Defaults
shows the default CoS output queue threshold map:
Command Modes
Global configuration
Command History
queue queue-id
Specify a queue number.
For queue-id, the range is 1 to 4.
cos1...cos8
Map CoS values to an egress queue.
For cos1...cos8, enter up to eight values, and separate each value with a
space. The range is 0 to 7.
space. The range is 0 to 7.
threshold threshold-id
cos1...cos8
cos1...cos8
Map CoS values to a queue threshold ID.
For threshold-id, the range is 1 to 3.
For cos1...cos8, enter up to eight values, and separate each value with a
space. The range is 0 to 7.
space. The range is 0 to 7.
Table 2-12
Default Cos Output Queue Threshold Map
CoS Value
Queue ID–Threshold ID
0, 1
2–1
2, 3
3–1
4
4–1
5
1–1
6, 7
4–1
Release
Modification
12.2(25)SE1
This command was introduced.