Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP Technical References
2-240
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem Command Reference Guide
380265-002
Chapter 2 CGESM Switch Cisco IOS Commands
queue-set
queue-set
Use the queue-set interface configuration command to map a port to a queue-set. Use the no form of this
command to return to the default setting.
command to return to the default setting.
queue-set qset-id
no queue-set qset-id
Syntax Description
Defaults
The queue-set ID is 1.
Command Modes
Interface configuration
Command History
Examples
This example shows how to map a port to queue-set 2:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# queue-set 2
You can verify your settings by entering the show mls qos interface [interface-id] buffers privileged
EXEC command.
EXEC command.
Related Commands
qset-id
ID of the queue-set. Each port belongs to a queue-set, which defines all the
characteristics of the four egress queues per port. The range is 1 to 2.
characteristics of the four egress queues per port. The range is 1 to 2.
Release
Modification
12.2(25)SE1
This command was introduced.
Command
Description
Allocates buffers to a queue-set.
Configures the weighted tail-drop (WTD) thresholds,
guarantees the availability of buffers, and configures the
maximum memory allocation to a queue-set.
guarantees the availability of buffers, and configures the
maximum memory allocation to a queue-set.
buffers
Displays quality of service (QoS) information.