Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP Technical References

Use the show mac address-table count user EXEC command to display the number of addresses present 
in all VLANs or the specified VLAN.

show mac address-table count [vlan vlan-id] [ | {begin | exclude | include} expression]

User EXEC

If no VLAN number is specified, the address count for all VLANs appears.

Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output 
do not appear, but the lines that contain Output appear.

This is an example of output from the show mac address-table count command:

Switch# show mac address-table count

Mac Entries for Vlan   : 1

---------------------------

Dynamic Address Count  : 2

Static  Address Count  : 0

Total Mac Addresses    : 2 

vlan vlan-id

(Optional) Display the number of addresses for a specific VLAN. The range is 1 
to 4094.

(Optional) Display begins with the line that matches the expression.

(Optional) Display excludes lines that match the expression.

(Optional) Display includes lines that match the specified expression.

Expression in the output to use as a reference point.

12.2(25)SE1

This command was introduced.

Displays MAC address table information for the specified 
MAC address.

Displays the aging time in all VLANs or the specified VLAN.

Displays dynamic MAC address table entries only.

Displays the MAC address table information for the specified 
interface.

Displays the MAC address notification settings for all 
interfaces or the specified interface.