Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP Technical References
A-9
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem Command Reference Guide
380265-002
Appendix A CGESM Switch Boot Loader Commands
flash_init
flash_init
Use the flash_init boot loader command to initialize the flash file system.
flash_init
Syntax Description
This command has no arguments or keywords.
Defaults
The flash file system is automatically initialized during normal system operation.
Command Modes
Boot loader
Command History
Usage Guidelines
During the normal boot process, the flash file system is automatically initialized.
Use this command to manually initialize the flash file system. For example, you use this command
during the recovery procedure for a lost or forgotten password.
during the recovery procedure for a lost or forgotten password.
Release
Modification
12.2(25)SE1
This command was introduced.