Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP Technical References
2-54
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem Command Reference Guide
380265-002
Chapter 2 CGESM Switch Cisco IOS Commands
cluster run
cluster run
Use the cluster run global configuration command to enable clustering on a switch. Use the no form of
this command to disable clustering on a switch.
this command to disable clustering on a switch.
cluster run
no cluster run
Syntax Description
This command has no arguments or keywords.
Defaults
Clustering is enabled on all switches.
Command Modes
Global configuration
Command History
Usage Guidelines
When you enter the no cluster run command on a cluster command switch, the cluster command switch
is disabled. Clustering is disabled, and the switch cannot become a candidate switch.
is disabled. Clustering is disabled, and the switch cannot become a candidate switch.
When you enter the no cluster run command on a cluster member switch, it is removed from the cluster.
Clustering is disabled, and the switch cannot become a candidate switch.
Clustering is disabled, and the switch cannot become a candidate switch.
When you enter the no cluster run command on a switch that is not part of a cluster, clustering is
disabled on this switch. This switch cannot then become a candidate switch.
disabled on this switch. This switch cannot then become a candidate switch.
Examples
This example shows how to disable clustering on the cluster command switch:
Switch(config)# no cluster run
You can verify your setting by entering the show cluster privileged EXEC command.
Related Commands
Release
Modification
12.2(25)SE1
This command was introduced.
Command
Description
Displays the cluster status and a summary of the cluster to which the switch
belongs.
belongs.