Cisco Cisco Fiber IGESM Switch Module for IBM Release Notes

These messages were added to the system message guide:

Error Message ETHCNTR-3-LOOP_BACK_DETECTED: Loop-back detected on [chars]. 

A loopback condition might be the result of a balun cable incorrectly connected to a 

port. [chars] is the interface name.

Check the cables. If a balun cable is connected and the loopback condition is 

desired, no action is required. Otherwise, connect the correct cable, and then enable the port. 

Error Message DOT1X-5-ERR_INVALID_AAA_MANDATORY_AV: Received unknown mandatory AV: 
[chars]=[chars] 

During authentication, authorization, and accounting (AAA) authorization, the switch 

received an unexpected mandatory Attribute-Value (AV) pair. The first [chars] is the AV pair name, 
and the second [chars] is the type of packet.

Check the RADIUS server configuration and ensure that the switch does not 

send the AV pair to the RADIUS server as part of the user profile information. 

Error Message HARDWARE-2-FAN_ERROR: Fan [chars] Failure

The switch fan is not working. [chars] is the fan name.

This is a hardware failure. The fan might recover automatically. If the fan 

failure persists, copy the message exactly as it appears on the console or in the system log. Research 
and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to look for 
similar reported problems.If you still require assistance, contact Cisco technical support and provide 
the representative with the gathered information. For more information about the online tools and 
about contacting Cisco, see the “Error Message Traceback Reports” section in the “System Message 
Overview” chapter.

Displays the current version of the PIC microcontroller image.

Displays the current value (in hex) of the PIC microcontroller registers.