Cisco Cisco SCE 1010 Service Control Engine Installation Guide
38
Viewing Configuration
When you enter configuration commands, it immediately effects the SCE platform operation and configuration. This
configuration, referred to as the
configuration, referred to as the
running-config
, is saved in the SCE platform volatile memory and is effective while the SCE
platform is up. After reboot, the SCE platform loads the
startup-config
, which includes the non-default configuration as saved
by the user, into the
running-config
.
The SCE platform provides commands for:
•
Viewing the running configuration
•
Viewing the startup configuration
After configuring the SCE platform, you may query for the running configuration using the command show running-config. This
command displays the non-default running configuration. To view all SCE platform running configuration, whether it is the
default or not, you may use the option all-data in the show running-config command.
command displays the non-default running configuration. To view all SCE platform running configuration, whether it is the
default or not, you may use the option all-data in the show running-config command.
To view the running configuration, use the following command:
Step 1
At the SCE 1000# prompt, type show running-config.
The system shows the running configuration.
SCE 1000# show running-config
#This is a general configuration file (running-config).
#Created on 15:50:56 CET MON December 11 2005
#cli-type 1
#version 1
clock timezone CET 1
snmp-server community “public” ro
snmp-server host 10.1.1.253 traps version 1 “public”
interface LineCard 0
connection-mode active
no silent
no shutdown
flow-aging default-timeout UDP 60
interface FastEthernet 0/0
ip address 10.1.5.109 255.255.0.0
interface FastEthernet 0/1
interface FastEthernet 0/2
exit
line vty 0 4
no timeout
exit
SCE 1000#
Saving the Configuration Settings
When you make changes to the current running configuration and you want those changes to continue to be valid when the
system restarts, you must save the changes before leaving the management session, that is, you must save the running
configuration to the startup configuration file.
system restarts, you must save the changes before leaving the management session, that is, you must save the running
configuration to the startup configuration file.
The SCE platform provides multiple interfaces for the purpose of configuration and management. All interfaces supply an API
to the same database of the SCE platform and any configuration made through one interface is reflected through all interfaces.
Furthermore, when saving the running configuration to the startup configuration from any management interface, all
configuration settings are saved regardless of the management interface used to set the configuration.
to the same database of the SCE platform and any configuration made through one interface is reflected through all interfaces.
Furthermore, when saving the running configuration to the startup configuration from any management interface, all
configuration settings are saved regardless of the management interface used to set the configuration.
To save configuration changes, complete the following steps:
Step 1
At the SCE 1000# prompt, type
show running-config
to view the running configuration.
The running configuration is displayed.