Cisco Cisco Customer Voice Portal 8.0(1)

The CLI online help provides product-specific information for each command's parameters.
Simply type the command and its parameter, followed by the "?" symbol. An example of this
mechanism is given in 

.

The following table provides basic information about the Unified System CLI commands.

Sets up, starts, and stops, a network packet capture.

capture

Capturing network packets with the System CLI can be performed in either local mode (to
run on a single machine), or system mode (to run across several machines simultaneously).
The capture start command has an optional duration parameter, while the capture stop
command has no parameters. The duration parameter indicates when the capture should
stop. If no duration is provided, the capture process stops after 1 day.

The capture command starts the packet capture on a single Unified CVP device or multiple
devices. The capture operation defaults to the interface card that is receiving packets and is
used for the Unified CVP server socket and IP address binding. The default setting of the
capture command will capture the network packets and save the capture information in the
Unified CVP logs folder which can be retrieved using the regular CLI trace command.

Modifies the current debug level.

debug

Note: Debug levels reset to the default level for a system component when that system
component is restarted, with the exception of the H.323 Voice Browser. The debug level of
the Voice Browser remains persistent when the voice browser process is restarted.

Access the online help system overview. Use the "?" character to access command-specific
and parameter-specific help. Refer to 

help

Exit the CLI.

exit

Main command for accessing, displaying, and saving (to a file) data about system
configuration and operation. Refer to the next table for descriptions of the sub-level show
commands.

show

Enter system  mode, which provides access to all the devices in your Unified CVP deployment
solution. Use the exit command to return to local mode.

system

The following table describes the variations of the show command.

Shows all the available information in all of the sub-categories listed in this table. However,
you can still enter qualifying parameters to restrict the information retrieved.

show all

Shows component-specific information. Available components are based on the Cisco Unified
product type and can be listed by entering the command: 

show component

Displays the application configuration.

show config

Shows the current debug level.

show debug

Shows a list of the devices in your deployment (system mode only).

show devices

Shows license information.

show license

Shows log contents. You can narrow this command to specific logs.

show log

Configuration and Administration Guide for Cisco Unified Customer Voice Portal Release 8.0(1)