Cisco Cisco Unified Customer Voice Portal 11.0(1)

Configuring the Gateway for IP to TDM Calls

The following components are required in order for the gateway to process IP to TDM calls:

•

Phones and numbers must be configured on the TDM switch.

•

Gateway must be defined on Unified CM.

•

Route pattern on Unified CM that will send the call to the gateway.

•

Need to configure a dial peer on the gateway that sends calls.

•

Dial 888800605x on the IP phone (this is a specific physical phone extension).

Configure the gateway to send the call to a particular VXML Server application, as follows:

To match the number in the VXML Server transfer node and send it out the T1 port to the G3
to its destination, use the following configuration:

Configuring a Cisco Multiservice IP-to-IP Gateway for Unified CM Connections

Unified CM IP- to-IP calls that are routed through an H.323 endpoint or H.323 gateway, you
must configure the following:

Configure the IPIPGW to transport calls to and from Unified CM.

Configuration and Administration Guide for Cisco Unified Customer Voice Portal Release 4.1(1)