Cisco Cisco Unified Customer Voice Portal 11.0(1)

Example 1: VRU-Only Call Flow Model

Assume that you want to extract UUS.dat and convert it to ASCII before sending it to Unified
ICME. Additionally, you also want to extract CPC.cpc.

Note: You can extract up to 20 GTD fields.

In the gateway, enter the following:

conf t

    application

    service <your-cvp-service-name>

    param gtd-attribute0 uus

    param gtd-field0 dat

    param gtd-format0 ascii

    param gtd-attribute1 CPC

    param gtd-field1 cpc

dial-peer voice pots 123

    service <your-cvp-service-name>

The data that will appear in Unified ICME UserToUserInfo will look as follows:

Note: The NSS parameters are delimited by two semicolons; fields within the NSS parameter
are delimited by a comma.

Example 2: Comprehensive Call Flow Model

Assume that you want to extract UUS.dat and convert it to ASCII before sending it to Unified
ICME. Additionally, you also want to extract CPN data. Note that unlike with Advanced Speech,
you cannot extract to field level; it is all-or-nothing for a parameter. In other words, if you
wanted to extract the CPN noa field, you also will also extract the CPN inn, noi, and # fields
as well.

On the Unified CVP H.323 Service, enter the following command in VBAdmin:

Configuration and Administration Guide for Cisco Unified Customer Voice Portal Release 4.1(1)