Cisco Cisco Agent Desktop 9.0 User Guide
Logging in Using CAD-BE
February 6, 2013
11
Logging in as a Local Agent
NOTE: If you are using Cisco IP Communicator as your phone, you
must start IP Communicator before you log in using CAD-BE.
must start IP Communicator before you log in using CAD-BE.
To log in as a local agent:
1. Start your web browser.
2. Type the following address in the address field, where <CAD server> is the
IP address or hostname of the server that hosts CAD.
http://<CAD server>:8088/cadbe/CAD-BE.jsp
NOTE: The address is case sensitive. Type the uppercase and
lowercase letters exactly as shown.
lowercase letters exactly as shown.
3. Press Enter. The Login window appears (
NOTE: A warning might appear, stating that the CAD-BE digital
signature cannot be verified. This means that the web browser cannot
verify the digital signature with a trusted source. To prevent this
warning from displaying again, select the check box Always trust
content from this publisher, then click Run to launch CAD-BE. Do not
click Cancel. If you cancel, CAD-BE will run in restricted mode and
some features will not function correctly.
signature cannot be verified. This means that the web browser cannot
verify the digital signature with a trusted source. To prevent this
warning from displaying again, select the check box Always trust
content from this publisher, then click Run to launch CAD-BE. Do not
click Cancel. If you cancel, CAD-BE will run in restricted mode and
some features will not function correctly.
Figure 2.
Login window
NOTE: The Login window
prompts for either login name
or login ID, depending on the
method that your
administrator configured.
prompts for either login name
or login ID, depending on the
method that your
administrator configured.