Cisco Cisco Application Extension Platform for SRE Release Notes
2
Release Notes for Cisco Application eXtension Platform (AXP) 1.5.2
OL-14273-01
System Requirements
System Requirements
This section describes the system requirements for Cisco Application eXtension Platform Version 1.5.2
and includes the following sections:
and includes the following sections:
•
•
•
•
•
•
Cisco IOS Software Release
Using Cisco IOS Release 12.4(24)T2 or 15.0(1)M1 and higher is recommended, depending on the type
of router—refer to the
of router—refer to the
Cisco AXP 1.5.2 supports routers with the following types of IP-based, crypto images:
–
Universal (c3900-universalk9-mz.SPA.151-1.XB)
–
IP-Base (not for applications that require the Event API)
–
IP-Voice
–
Adv-Security
–
Adv-Enterprise
You can download the Cisco AXP 1.5.2 image from
. Navigate the website as shown in
the following steps:
Step 1
Choose Products and Routers > Routers > All Products tab.
Step 2
Choose Cisco Application Extension Platform > Download Software > Cisco Application Extension
Platform Version 1.5.
Platform Version 1.5.
Netconf provides the interface for the Cisco IOS CLI API. Depending on the underlying transport
protocol (BEEP or SSH), different versions of the Cisco IOS software are supported. For further
information, refer to the “Netconf” section of Appendix G, in the
protocol (BEEP or SSH), different versions of the Cisco IOS software are supported. For further
information, refer to the “Netconf” section of Appendix G, in the
Supported Hardware
Cisco ISR and Cisco ISR G2 routers are supported by Cisco AXP.
For Cisco Integrated Services Routers, we recommend using Cisco IOS Release 12.4(24)T2 and higher.
For Cisco Integrated Services (Generation 2) Routers, we recommend using Cisco IOS Release
15.0(1)M1 and higher.
15.0(1)M1 and higher.