Cisco Cisco DX70 Technical References
D15363.02
Cisco TelePresence DX70 and DX80 API Reference Guide CE8.2, SEPTEMBER 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved.
62
Cisco TelePresence DX70 and DX80
API Reference Guide
xConfiguration NetworkServices HTTP Mode
Define whether or not to allow access to the video system using the HTTP or HTTPS (HTTP
Secure) protocols. Note that the video system's web interface use HTTP or HTTPS. If this
setting is switched Off, you cannot use the web interface.
If you need extra security (encryption and decryption of requests, and pages that are returned
If you need extra security (encryption and decryption of requests, and pages that are returned
by the web server), allow only HTTPS.
Requires user role: ADMIN
Default value: HTTP+HTTPS
Default value: HTTP+HTTPS
USAGE:
xConfiguration NetworkServices HTTP Mode:
Mode
where
Mode
: Off/HTTP+HTTPS/HTTPS
Off: Access to the video system not allowed via HTTP or HTTPS.
Off: Access to the video system not allowed via HTTP or HTTPS.
HTTP+HTTPS: Access to the video system allowed via both HTTP and HTTPS.
HTTPS: Access to the video system allowed via HTTPS, but not via HTTP.
xConfiguration NetworkServices HTTPS VerifyServerCertificate
When the video system connects to an external HTTPS server (like a phone book server or an
external manager), this server will present a certificate to the video system to identify itself.
Requires user role: ADMIN
Default value: Off
Default value: Off
USAGE:
xConfiguration NetworkServices HTTPS VerifyServerCertificate:
VerifyServerCertificate
where
VerifyServerCertificate
: Off/On
Off: Do not verify server certificates.
On: Requires the system to verify that the server certificate is signed by a trusted
Certificate Authority (CA). This requires that a list of trusted CAs are uploaded to the
system in advance.
xConfiguration NetworkServices HTTPS VerifyClientCertificate
When the video system connects to a HTTPS client (like a web browser), the client can be
asked to present a certificate to the video system to identify itself.
Requires user role: ADMIN
Default value: Off
Default value: Off
USAGE:
xConfiguration NetworkServices HTTPS VerifyClientCertificate:
VerifyClientCertificate
where
VerifyClientCertificate
: Off/On
Off: Do not verify client certificates.
On: Requires the client to present a certificate that is signed by a trusted Certificate
Authority (CA). This requires that a list of trusted CAs are uploaded to the system in
advance.
xConfiguration NetworkServices NTP Mode
The Network Time Protocol (NTP) is used to synchronize the system's time and date to a refer-
ence time server. The time server will be queried regularly for time updates.
Requires user role: ADMIN
Default value: Auto
Default value: Auto
USAGE:
xConfiguration NetworkServices NTP Mode:
Mode
where
Mode
: Auto/Manual/Off
Auto: The system will use an NTP server for time reference. As default, the server
address will be obtained from the network's DHCP server. If a DHCP server is not used,
or if the DHCP server does not provide an NTP server address, the NTP server address
that is specified in the NetworkServices NTP Server [n] Address setting will be used.
Manual: The system will use the NTP server that is specified in the NetworkServices
NTP Server [n] Address setting for time reference.
Off: The system will not use an NTP server. The NetworkServices NTP Server [n]
Address setting will be ignored.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfiguration