Cisco Cisco MDS 9000 NX-OS Software Release 6.2 Release Notes
Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 6.2(11e)
OL-29201-04
Caveats
•
•
•
•
ASCII File Can Be Copied to the Startup Configuration
The copy bootflash:runnig-config.ascii startup-config command that was deprecated in an earlier Cisco NX-OS release is
enabled from Cisco NX-OS Release 6.2(1).
enabled from Cisco NX-OS Release 6.2(1).
Fibre Channel Security Protocol (FC-SP) Support
From Cisco NX-OS Release 6.2(9) onwards, the FC-SP feature is supported on Cisco MDS 9700 Series.
Install Module Command Changes
The install module module-number bios command is not supported on the Cisco MDS 9710 switch in Cisco NX-OS Release
6.2(1) and later releases. Use the install all command to upgrade the BIOS during a software upgrade.
6.2(1) and later releases. Use the install all command to upgrade the BIOS during a software upgrade.
The install module module-number bios command continues to be supported in Cisco NX-OS Release 6.2(1) on Cisco MDS
9500 Series switches.
9500 Series switches.
IOA Scaling Support on Supervisor-2 Module
From Cisco MDS NX-OS Release 6.2(9) onwards, I/O Accelerator (IOA) scaling is supported only on the Supervisor-2A
module and is not supported on the Supervisor-2 module.
module and is not supported on the Supervisor-2 module.
Caveats
Resolved Caveats
Table 15
Resolved Caveats in Cisco MDS NX-OS Release 6.2(11e)
Identifier
Description
FCNS database does not show actual interface when the interface is FICON.
FICON FTA - Always flow controlling writes and reads leads to poor
performance.
performance.
FICON FTA - Write and Read acceleration fail for SecureAgent Virtual Tape.
Distributed reflective denial-of-service vulnerability on NTP server.
Cisco NX-OS Software-Based Products AAA Bypass Vulnerability.
N3k/N6K/N7K/N9K/MDS January 2016 OpenSSH vulnerabilities.