Cisco Cisco IOS Software Release 12.2(14)S
Frame Relay Queueing and Fragmentation at the Interface
Configuration Tasks
5
Cisco IOS Release 12.2(14)S
Configuration Tasks
See the following sections for configuration tasks for the Frame Relay Queueing and Fragmentation at
the Interface feature. Each task in the list is identified as either required or optional.
the Interface feature. Each task in the list is identified as either required or optional.
•
•
(optional)
•
(optional)
•
(required)
•
(optional)
Configuring Class Policy for the Priority Queue
To configure a policy map for the priority class, use the following commands beginning in global
configuration mode.
configuration mode.
Command
Purpose
Step 1
Router(config)# policy-map policy-map
Specifies the name of the policy map to be created
or modified.
or modified.
•
Use this command to define the queueing
policy for the priority queue.
policy for the priority queue.
Step 2
Router(config-pmap)# class class-name
Specifies the name of a class to be created and
included in the service policy.
included in the service policy.
•
The class name that you specify in the policy
map defines the characteristics for that class
and its match criteria as configured using the
class-map command.
map defines the characteristics for that class
and its match criteria as configured using the
class-map command.
Step 3
Router(config-pmap-c)# priority bandwidth-kbps
Creates a strict priority class and specifies the
amount of bandwidth, in kbps, to be assigned to the
class.
amount of bandwidth, in kbps, to be assigned to the
class.