Cisco Cisco AnyConnect Secure Mobility Client v2.x Troubleshooting Guide
Error Messages on AnyConnect for Apple iOS
Devices
Devices
Document ID: 113562
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Error Messages
Licensing Issue
Certificate Authentication Issue
Address Assignment Issue
Group URL Issue
Related Information
Prerequisites
Requirements
Components Used
Conventions
Error Messages
Licensing Issue
Certificate Authentication Issue
Address Assignment Issue
Group URL Issue
Related Information
Introduction
This document describes different error messages generated when using the Cisco AnyConnect VPN Client
on Apple iPad devices. Corresponding resolutions required in order to eliminate those error messages are also
included.
on Apple iPad devices. Corresponding resolutions required in order to eliminate those error messages are also
included.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
The information in this document is based on these software and hardware versions:
Cisco AnyConnect Secure Mobility Client 2.5.x for Apple iOS and later
•
Cisco ASA Security Appliance that runs software version 8.2 and later
•
Apple iOS 4.x and later
•
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.
Error Messages
This section provides examples of error messages and their respective solutions.